Platform and Tray Mounts & Accessories

The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.

The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.

The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.

The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.

The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.

Beacon Light Plates, available to accommodate a variety of beacon light types in the market. Standard circular Light Plates are able to be mounted flat on-top of cross-bars. Alternatively the offset bracket provides for mounting outside the platform area in multiple locations. Install your light of choice into the bracket and it's as easy as mounting the bracket and tightening the bolts.

Beacon Light Plates, available to accommodate a variety of beacon light types in the market. Standard circular light plates are able to be mounted flat on-top of cross-bars. Alternatively the offset bracket provides for mounting outside the platform area in multiple locations. Install your light of choice into the bracket and it's easy as mounting the bracket and tightening the bolts.

Mounting points to provide maximum strength and support.

Fits to front underside of roof rack to minimise wind noise- vehicle specific

Install the 4.5W LED Rock Light on your Slimline II or Slimsport Rack Handle Bracket for extra nighttime visibility.

Create a sturdy, secure tie-down base for your Front Runner Stratchits (or any other style of tie-down strap) with these Tie Down Rings/Eye Bolts. They can be used in load bed tracks and on flat surfaces.

This off-road tough ladder is the easiest way to load and access the gear on your Land Rover Defender 90/110’s roof rack.

The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.

The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.

The Wedgetail roof rack to suit the Utemaster Canopy fits using a small bracket that rivets to the roof of the Canopy using high strength stainless sealed rivets and is sealed to the roof using suitable natural cure silicon.

Yakima RuggedLine is a real premium platform-to-vehicle mounting system, designed and tested in Australia. Constructed from powder-coated stainless steel for ultimate reliability, RuggedLine is ready to be paired with the existing (and proven) range of LockNLoad Platforms. The strength of RuggedLine also boasts a modern look designed by an automotive styling firm. The angular cut-outs along the length pair well with modern vehicle styling trends, and topping this off is premium spec automotive badging in blackened chrome. (RuggedLine Spine only, Please lookup vehicle specific platform fitment under 'Shop By Vehicle' on the front page of our website.).

M10 Stainless Steel Eye Bolts

M8 Stainless Steel Eye Bolt Tie Down Kit – Rhino Pioneer Platform Rack [Qty: 2]

Flush Flat Maxtrax & TRED Mounts to suit Front Runner Platform Racks

Tradesman Maxtrax Mounts to suit Rhino-Rack Pioneer Tradie Platform [No Pins]

Hi-Lift Jack & Shovel Holder Mount to suit Rhino-Rack Pioneer Platform

QuickFist Clamp Shovel Holder with Bracket to suit Rhino-Rack Pioneer Platform

 

• 316 Stainless Steel Eye Bolt is hard-wearing and won't rust.
• Allows you to easily secure loads to your platform rack.
• Eye Bolts are rated to 140kg SWL and 2000kg breaking load.

 

The Wedgetail Mercedes Sprinter Light Bar Mounting Kit accessory, is an extension to the Wedgetail roof rack designed specifically for High Roof variants of the Sprinter, creating an extended platform that covers the full length of the roof. This extension provides additional space for mounting multiple spotlights or light bars. Please note that custom drilling may be required to install your preferred lighting options.

Wedgetail can supply conduit carriers in 100 or 150 mm diameter that can hold up to a maximum length of five metres. Included in the kit is; 3 fixed awning brackets, 3 conduit carrier brackets and 2 twist-lock end caps.

Wedgetail can supply conduit carriers in 100 or 150 mm diameter that can hold up to a maximum length of five metres. Included in the kit is; 3 fixed awning brackets, 3 conduit carrier brackets and 2 twist-lock end caps.

This product contains the Anti-Rotation Washer (Black) in a pack of 2 that is required for some products when using Zwifloc channel nuts.

The rubber inserts fit into the top channel of the cross bars on all Wedgetail roof racks. The rubber inserts sit above the top of the cross bar and provide a soft surface to protect items that are stored on the roof rack and also prevent items moving around. The inserts are available in a range of sizes to fit all of our roof racks. They are fitted by pushing the inserts into the support channels.

Mount or remove your Wolf Pack Pros in seconds with these Wolf Pack Pro Rack Mounting Brackets. These durable brackets will hold your storage bin securely in place through any terrain and are designed to work with Front Runner Roof Racks. They are lockable and offer versatile placement anywhere on your roof rack.

The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.

The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.

The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.

The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.