Platform and Tray Mounts & Accessories

The Wedgetail recessed aerial mount bracket has been designed to accommodate GME, Uniden and other folding aerial mounts. The recessed bracket allows the folding aerial to sit flush with the crossbar surface once in the fully folded position.

The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.

Introducing the new Recovery Traction Board Holder, the perfect accessory for outdoor enthusiasts and off-road adventurers. The holder is designed to carry up to 4 recovery traction boards securely with a key lock mechanism. The holder is versatile and can be mounted horizontally or vertically on a Pioneer Platform, Reconn-Deck or Vortex Bars. Whether you're in the middle of a muddy trail or a sandy desert, you can quickly remove the boards from the holder and get back on track. In addition to recovery boards, the MSIT can safely hold your Aluminium folding ladder (RAFL).

The Recessed Wedgetail solar panel brackets allow you to easily secure your solar panels flush to your Wedgetail platform roof rack.

The light bar support extension bracket, is an addition to the lightbar support plate accessory, that allows for lightbar mountings wider than 40 inches and off-road lighting solutions. It is manufactured from 3mm laser cut aluminium and is adjustable to suit varying sizes of lights.

The Accessory Base Bracket is a universal bracket designed to fit Tracklander accessories onto Tracklander roof racks

When attached to TLRABB (Accessory Base Bracket), TLRRTA is designed to carry up to FOUR recovery tracks

When attached to TLRABB (Accessory Base Bracket), TLRUC is designed to hold shovels, paddles and rods

The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.

Ridge Mount is designed to be strong, easy to install but most importantly to spread the load evenly while match the aesthetics of the Titan Tray and your vehicle.

The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.

The most anticipated Backbone mounting system of the year has arrived - introducing Backbone for your Ford Everest Trend, Sport, Titanium+ or Wildtrak! Designed to be paired with the Rhino-Rack Pioneer platform, this stylish and award winning combination has been specifically designed to complement and follow the contours of the Ford Everest's roof, blending sleek aesthetics with exceptional functionality.

Easily access the gear on your rack with this Handle/Light Slimline II Rack Bracket so you can always get a grip. This grab handle comes with a 4.5W rock light and can be mounted on either side of your rack.

The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.

The Rhino-Rack Ford Ranger PX wind fairing is a vehicle specific product that is designed to integrate with a Pioneer platform and Backbone system. The strong, light alloy construction can be fitted with ease and will instantly transform the look of your vehicle.

Wedgetail tie down straps. 3 meters long, pack of 2

Designed specifically for the MKIII Titan Tray (Red packaging) the Ridge Mount is designed to be strong, easy to install but most importantly to spread the load evenly while match the aesthetics of the Titan Tray and your vehicle.

The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.

The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.

The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.

The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.

The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.

The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.

Ridge Mount is designed to be strong, easy to install but most importantly to spread the load evenly while match the aesthetics of the Titan Tray and your vehicle.

The 42L Pro Water Tank from Front Runner is ideal for both long and short adventures. From washing up to washing down this tank will give you the water you need on the move. It is made from BPA-free, food-grade polyethylene, and fits neatly on a Front Runner Roof Rack when using this specially designed mounting system. The mounting bracket is easily removable and does not interfere with the cap operation.

The Rola Ridge Mount LED Light is specifically designed with a die-cast aluminium housing and stainless steel base plate to fit perfectly into your ridge mount.

Introducing the new Rhino-Rack Backbone base kit for Mercedes Benz Sprinter - ROLM1- BK. This base kit allows consumer to fit their Reconn-Deck bars on top of their vehicle roof to support their adventure needs - whether that’s trade, camping or long-haul overland adventure.

Yakima RuggedLine is a real premium platform-to-vehicle mounting system, designed and tested in Australia. Constructed from powder-coated stainless steel for ultimate reliability, RuggedLine is ready to be paired with the existing (and proven) range of LockNLoad Platforms. The strength of RuggedLine also boasts a modern look designed by an automotive styling firm. The angular cut-outs along the length pair well with modern vehicle styling trends, and topping this off is premium spec automotive badging in blackened chrome. (RuggedLine Spine only, Please lookup vehicle specific platform fitment under 'Shop By Vehicle' on the front page of our website.)

The Wedgetail roof rack to suit the EGR Roll top utelid fitted to a vehicle fits using the existing tracks provided in the rolltop.

The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.

The Hi-Lift jack is an invaluable off-road recovery and tire-changing device, but it can be an ungainly accessory to store and transport. Front Runner’s Hi-Lift Jack Bracket is a two-piece locking bracket that offers a solid, convenient, and accessible way to do this. It bolts easily to the top of your roof rack and, thanks to its powder coated steel construction, it is off-road tough.

Designed specifically for the MKIII Titan Tray (Red packaging) the Ridge Mount is designed to be strong, easy to install but most importantly to spread the load evenly while match the aesthetics of the Titan Tray and your vehicle.

Designed specifically for the MKIII Titan Tray (Red packaging) the Ridge Mount is designed to be strong, easy to install but most importantly to spread the load evenly while match the aesthetics of the Titan Tray and your vehicle.