Roof Rack Accessories
Filter
-
A Rhino-Rack Ratchet Grab is the ideal accessory to ensure that your load is fastened and secured to your roof racks. By feeding it through the channel of your Rhino-Rack Heavy Duty crossbar or a Mont Blanc bar, the stainless steel ratchet grab comes with$85.00 $68.00 -
A Rhino-Rack Ratchet Grab is the ideal accessory to ensure that your load is fastened and secured to your roof racks. With twin hooks and bright blue 3m / 10ft straps, the RRG1 is recommended to be used when securing large items down to your roof racks li -
A Rhino-Rack Ratchet Grab is the ideal accessory to ensure that your load is fastened and secured to your roof racks. With twin hooks and bright yellow 4m / 13ft straps, the RRG2 is recommended to be used when securing large items down to your roof racks -
Cut to 1250mm, this rubber strip is designed to fit into the top of the Rhino-Rack Heavy Duty bar. Comes as a pair. -
Cut to 1375mm, this rubber strip is designed to fit into the top of the Rhino-Rack Heavy Duty bar. Comes as a pair.$63.00 -
Cut to 1500mm, this rubber strip is designed to fit into the top of the Rhino-Rack Heavy Duty bar. Comes as a pair. Pre-cut to exact length Easy to install/remove -
Cut to 1600mm, this rubber strip is designed to fit into the top of the Rhino-Rack Heavy Duty bar. Comes as a pair. -
Cut to 1800mm, this rubber strip is designed to fit into the top of the Rhino-Rack Heavy Duty bar. Comes as a pair. -
The two-in-one designed small ladder peg allows you to support your ladder from sliding and well as providing a tie off point when you are securing your load. The small pegs are 75mm/3in height and feature an eye bolt head to allow easy tie off. Comes as$45.00 -
- The Rhino-Rack Universal Side Loader makes loading your heavy kayak or awkward SUP onto your roof rack an easy task
- Designed to allow one person loading of even the heaviest kayaks, its a simple yet effective design
- Simply setup your Universal Side Loader, then lift one side of your kayak or board onto the RUSL, using it as a pivot to load the other end onto your roof rack.
-
The Rhino-Rack Work Light Bracket is used to mount various lights and aerials to your Rhino-Rack Vortex and Heavy Duty bars. It is made from oxidized mild steel to withstand corrosion. Spring washers are included so your Work Light remains fixed even when$49.00 $40.00 -
Rhino-Rack's foam Wrap Pads are the perfect accessory to wrap around your Vortex bars for the extra protection required when loading and unloading your kayak/canoe/surfboard. -
- Rhino's wrap pads are perfect for protecting both your roof rack and your load when carryingitems directly on your roof rack crossbars
- Suitable for a surfboard, SUP, or even a kayak
- Fits most brands and types of roof rack crossbars
-
- Rhino's wrap pads are perfect for protecting both your roof rack and your load when carryingitems directly on your roof rack crossbars
- Suitable for a surfboard, SUP, or even a kayak
- Fits most brands and types of roof rack crossbars
-
- Rhino's wrap pads are perfect for protecting both your roof rack and your load when carryingitems directly on your roof rack crossbars
- Suitable for a surfboard, SUP, or even a kayak
- Fits most brands and types of roof rack crossbars
-
The U Bolt Kit is recommended for use when mounting a Rhino-Rack Mesh Basket, Mesh Platform or a Luggage Box/Ski Box to the Rhino-Rack Vortex Bar.$66.00 $53.00 -
The U Bolt Kit is recommended for use when mounting a Rhino-Rack Mesh Basket, Mesh Platform, or a Luggage Box/Ski Box to the Rhino-Rack Vortex Bar. Sold as a set of 4 rounded U Bolts, they will assist you to mount Rhino-Rack accessories more securely to your roof racks.
$55.00 $44.00 -
The S400 Kayak and Canoe Carrier requires special fitting kits to fit on your roof rack crossbars. The S400-FK1 Fitting Kit will suit the following roof rack systems: Rhino-Rack Vortex, Thule Aero, Rola* Universal Rail Bars.$9,999.00 -
The S400 Kayak and Canoe Carrier requires special fitting kits to fit on your roof rack crossbars. The S400-FK3 Fitting Kit will suit the following roof rack systems: Rhino-Rack Heavy Duty, Rola* Commercial Bar, Whispbar HD.$9,999.00 -
The S400 Kayak and Canoe Carrier requires special fitting kits to fit on your roof rack crossbars. The S400-FK4 Fitting Kit will suit the following roof rack systems: Rola* Sports Bars.$9,999.00 -
The S400 Kayak and Canoe Carrier requires special fitting kits to fit on your roof rack crossbars. The S400-FK5 Fitting Kit will suit the following roof rack systems: Rhino-Rack Euro Bars, Yakima Square bars, Thule Square Bars, Prorack P Bars.$9,999.00 -
The S400 Kayak and Canoe Carrier requires special fitting kits to fit on your roof rack crossbars. The S400-FK6 Fitting Kit will suit Universal/Original Equipment bars as well as most bars available on the market. It will fit all roof racks with a bar wid$9,999.00 -
The Rhino-Rack Vortex Load Holder is designed so that you can secure your load in position so it doesn't slide in transit possibly damaging other items you have mounted to your roof racks. -
The Rhino-Rack Vortex Eye Nut Kit/ Vortex Eye Bolt is designed to create a tie off point to secure your load onto your Rhino-Rack Vortex bar. -
The VA Underside Tie Down Point is the perfect accessory to complement your Rhino-Rack Vortex crossbar system by creating a secure tie down point for your straps. -
The Vortex Aerial Bracket is used to attach a standard aerial to your Rhino-Rack Vortex bar. It is simple to fit and will ensure that your aerial is secure for both on and off road adventures. This product is made from zinc plated mild steel so won't corr -
The Rhino-Rack Vortex Beacon Mounting Plate is designed to adapt a standard beacon light to your Rhino-Rack Vortex bar. For the night tradesmen or outdoor enthusiast who wants to make sure their vehicle is seen by all. Made from Galvanised Steel, with spring washers included, this mounting plate can withstand the harshest conditions and the hardware won't come loose while driving on corrugated roads. The installation is simple and easy to create custom lighting configurations. Using two t-bolts, the plate is secured to your roof racks using an Allen Key which is provided. -
Carry and transport your jack safely with the Rhino-Rack High Lifting Jack Holder Bracket. It is the perfect accessory to mount directly to your Rhino-Rack Vortex crossbars saving you space in your vehicle whilst also preventing cabin damage to your vehicle. Designed for maximum security in mind, padlocks may be used to safely transport your jack. -
The Alloy Tray Fitting Kit SK24 is designed to fit a number of Rhino-Rack Alloy Trays to Rhino's Vortex 2 crossbar systems including: AT1210, AT1510 Attach certain Alloy Trays to your Rhino-Rack Vortex 2 crossbar system Fits the AT1210, AT1510 Comes with$43.00 -
The Alloy Tray Fitting Kit SK35 is designed to fit a number of Rhino-Rack Alloy Trays to Rhino's Vortex 2 and 3 crossbar systems including: AT1512, AT1810, AT1812, AT2012, AT2108 Attach certain Alloy Trays to your Rhino-Rack Vortex 2 and 3 crossbar system -
The Vortex Ladder Strap suits lets you secure your ladder quickly and safely using it's camloc ladder strap. It saves you time and money, no more hunting around trying to find some cable or tape to secure your ladder. The strap length is 500mm with all components made from stainless steel or zinc plated steel for long life and trouble free operation. -
Made from galvanized steel, these 100mm (4") pipe clamps are sold as a pair. They fit into the top channel of a Rhino-Rack Vortex bar, and are secured in place with an M8 bolt and nyloc nut. Suitable for use with Rhino-Rack 100mm (4") Conduit Carriers Sol -
Made from galvanized steel, these 150mm (6") pipe clamps are sold as a pair. They fit into the top channel of a Rhino-Rack Vortex Bar, and are secured in place with an m8 bolt and nyloc nut. Suitable for use with Rhino-Rack 150mm (6") Conduit Carriers Sol$62.00 -
A Rhino-Rack Ratchet Grab is the ideal accessory to ensure that your load is fastened and secured to your roof racks. By feeding it through the channel of your Rhino-Rack Vortex crossbar, the stainless steel ratchet grab comes with a 2m long black strap w -
The Rhino-Rack Alloy Rollers are an integral part of easily loading your roof system. If you have any issues with individual parts these Spare Roller Mounting Brackets are available if you require replacements for your Alloy Rollers. Sold as a pair these$9,999.00 -
The VACB kit allows you to fit the BC2, BC3 or BC4 conduit Bracket to a Rhino-Rack Vortex Bar. The kit comprises of channel nuts and bolts for seamless installation. This Fit kit includes 2 M8 T-Bolts, washers and nuts to fit BC2, two kits are required fo$20.00
