Roof Rack Accessories
Filter
-
- A 2 pack of basic L style awning brackets with extended leg to fit your Sunseeker awning to Rhino-Rack Vortex and HD crossbars as well as Pioneer platform and tradie roof rack systems.
- Easy to install, simply slide the brackets into the channel on your roof rack and attach your awning, all necessary mounting hardware is included
- Can be installed using Rhino’s Zwifloc channel nuts, sold separately, for an even more versatile and simple mounting option
-
- Easy-to-use zip on awning extension that can be used as either a 2m awning extension or as a side wall for weather protection
- Compatible with Rhino-Rack Sunseeker 2.0m awning and Rhino’s Batwing Compact awnings
- Includes telescopic leg poles, guy ropes, pegs, and storage bag
-
- Easy-to-use awning side wall that can be used as either a 2m awning extension or as a side wall for weather protection
- Attaches by sliding it onto the Sunseeker’s side support arm and then securing it via Velcro straps
- Compatible with Rhino-Rack Sunseeker 2.0m awning and Sunseeker 2.5m awning
$261.00 -
- If you’ve opted for one of Rhino’s sleek flushbar roof racks such as RV, RSP, SG, StealthBar or 2500 RS you can still fit an awning to it with this bracket kit.
- Angled up for maximum door clearance
- Includes 2 brackets and all necessary mounting hardware
-
- If you’ve opted for one of Rhino’s sleek flushbar roof racks such as RV, RSP, SG, StealthBar or 2500 RS you can still fit an awning to it with this bracket kit.
- Angled down for a lower profile
- Includes 2 brackets and all necessary mounting hardware
-
The Pioneer Heavy Duty Attachment Plate allows you to attach the Rhino-Rack Pioneer Trays and Platforms to your Heavy Duty crossbars. Now you can transform your crossbar system with a simple installation process and create more roof space for your daily adventure and commercial needs. Made from strong mild steel this powder coated Pioneer Heavy Duty Attachment Plate Kit will resist corrosion. A single set includes two attachment plates that suit a single bar system. This product will fit all Pioneer Tray and Platform sizes. -
The Rhino-Rack square mouth shovel with tough blade is made for all weather conditions. It is corrosion resistant and powder coated black. The contoured grip is designed to be non slip with superior comfort to provide greater control. Beneath the grip consists of a composite multicore fibreglass (PVC and TPE) handle.
-
The Pioneer roller is designed to fitted to the rear of a Platform or Tradie. It runs nearly the full width of the tray and provides a roller to assist in loading ladders, sheets of timber and more. The roller can be fit to new trays or retro-fit to older trays. This kit is not suitable for Pioneer Trays. -
Made from powder coated stainless steel, this bracket allows you to mount LED Lights weighing up to 7.5kg / 16.5lb onto your Rhino-Rack Vortex and Heavy Duty crossbars. It will also fit Whispbar HD and Rola HD crossbars for ulimtate versatility. Take your$125.01 $101.00 -
Want to add security and peace of mind to your setup? Our Cable Core Lockdowns fit neatly into the C channel of your Vortex crossbars or Pioneer product and are available in three different length cables. Ergonomically designed to suit a wide range of cro$57.99 -
Want to add security and peace of mind to your setup? Our Cable Core Lockdowns fit neatly into the C channel of your Vortex crossbars or Pioneer product and are available in three different length cables. Ergonomically designed to suit a wide range of cro -
Want to add security and peace of mind to your setup? Our Cable Core Lockdowns fit neatly into the C channel of your Vortex crossbars or Pioneer product and are available in three different length cables. Ergonomically designed to suit a wide range of cro$94.00 -
The Pioneer Roller is designed to fit the rear of a platform. It runs nearly the full width of the tray and provides a roller to assist in loading ladder, sheets of timber, etc. The roller can be fit to new trays or retro-fit to older trays. This kit is n$156.00 -
- Pack of 2 mounting brackets designed for fitting Sunseeker, Batwing, and Batwing Compact awnings to any Rhino-Rack platform or tray, plus Rhino Vortex and HD crossbar roof racks
- Made of powder coated steel for corrosion resistance and built strong with reinforced sections
- Suitable for other awnings that have 100mm spacing between spine tracks
-
This kit includes 4 Tie Down Points to make sure your load is extremely secure. Their low profile design makes them an ideal accessory when height is an issue. No matter whether youre a traveller, tradesman or weekender the Pioneer Tie Down kit will work for you.$84.00 $68.00 -
Ideal for use as a replacement or spare, the BC150 End Cap is perfectly suited for use with any of Rhino-Rack's 150mm (6") width Conduit Carriers. Like our Conduit Carriers, this product has been crash tested to ensure durability. It also comes with a wire trace to stop you from losing it.$100.00 -
The BC2 Conduit Clamp Set will adapt a 100mm (4") Conduit Carrier to a Rhino-Rack Heavy Duty Bar. It comes with 2 clamps and allows for mounting of the conduit above or below the bar.$74.00 $60.00 -
This kit consists of 2 clamps to allow a 150mm (6") Conduit Carrier to be fitted to a Rhino-Rack Heavy Duty Bar. The clamps allow mounting of the conduit above or below the bar.$89.00 $72.00 -
The BC3 Conduit Clamp Set will adapt a 100mm (4") Conduit Carrier to a Rhino-Rack Heavy Duty Bar. It comes with 3 clamps and allows for mounting of the conduit above or below the bar.$100.00 $80.00 -
This kit consists of 3 clamps to allow a 150mm (6") Conduit Carrier to be fitted to a Rhino-Rack Heavy Duty Bar.$129.00 $104.00 -
The BC3-LSB Bracket allows for the Rhino-Rack BC3 conduit clamp to be mounted off the side giving more space along the cross bars for other equipment such as ladders and other work gear. The BC3 conduit clamp is not included and needs to be purchased sepa -
Ideal for use as a replacement or spare, the BCW Conduit End Cap is perfectly suited for use with any of Rhino-Rack's 100mm (4") width Conduit Carriers. Like our Conduit Carriers, this product has been crash tested to ensure durability. It also comes with$61.00 -
Reinforced for carrying copper pipes, this front end cap is designed to ensure your copper pipes (up to a total weight of 15kgs/33lbs), stay secure in your conduit. When braking suddenly, this Conduit End Cap will prevent your piping from spilling out ove$131.00 -
The Conduit End Cap & Sleeve is the ideal accessory to close off your conduit. Designed for easy use, the Conduit End Cap & Sleeve features a ribbed end cap for added grip as well as a secure wire trace for easier operation and loss prevention. (Comes as a single cap and single Sleeve. Not supplied in pairs.)$138.00 -
The Conduit End Cap & Sleeve is the ideal accessory to close off your conduit. Designed for easy use, the Conduit End Cap & Sleeve features a ribbed end cap for added grip as well as a secure wire trace for easier operation and loss prevention. (Comes as a single cap and single Sleeve. Not supplied in pairs.)$261.00 -
$9,999.00 -
- Constructed using 500D High-End poly canvas tarpaulin - weatherproof, tear resistant & fibre reinforced
- Protective velcro overlap to shield the zipper from the elements
- Welded seams provide superior weatherproofing compared to traditional stitching
-
- Constructed using 500D High-End poly canvas tarpaulin - weatherproof, tear resistant & fibre reinforced
- Protective velcro overlap to shield the zipper from the elements
- Welded seams provide superior weatherproofing compared to traditional stitching
-
- Constructed using 500D High-End poly canvas tarpaulin - weatherproof, tear resistant & fibre reinforced
- Protective velcro overlap to shield the zipper from the elements
- Welded seams provide superior weatherproofing compared to traditional stitching
-
- Constructed using 500D High-End poly canvas tarpaulin - weatherproof, tear resistant & fibre reinforced
- Protective velcro overlap to shield the zipper from the elements
- Welded seams provide superior weatherproofing compared to traditional stitching
-
- Constructed using 500D High-End poly canvas tarpaulin - weatherproof, tear resistant & fibre reinforced
- Protective velcro overlap to shield the zipper from the elements
- Welded seams provide superior weatherproofing compared to traditional stitching
-
Rhino-Rack has designed a new conduit locking end cap that is a game changer. This endcap was designed to provide maximum security with our built in Masterkey compatible steel locks. The cover plate includes high quality internal seals to keep your conten$163.00 -
Rhino-Rack has designed a new conduit locking end cap that is a game changer. This endcap was designed to provide maximum security with our built in Masterkey compatible steel locks. The cover plate includes high quality internal seals to keep your conten$94.00 $76.00 -
Rhino-Rack has designed a new orange conduit locking end cap that is a game changer. This endcap was designed to provide maximum security with our built in Masterkey compatible steel locks. The cover plate includes high quality internal seals to keep your -
The MSLHK Ladder Hoop is available as a spare part for your Rhino-Rack Multi Slide Ladder system. The ladder hoops are sold as a pair and are used to prevent the ladder from lifting up when in transit.$70.00 -
The NKL-FK2 is a fitting kit designed so you can fit the Nautic Kayak Lifter to the right hand side of your Thule Wingbar by simply drilling a couple holes and screwing the kit on. Use the Nautic Kayak Lifter (NKL) to make life easier when loading and unl$90.00
