Platform and Tray Mounts & Accessories
Enter your vehicle
Take the guess work out of roof racks and use the vehicle fit finder.
-
The Rhino-Rack Backbone is a mounting system for the Ford F250/350/450/50 Super Crew Cab (2017 onwards).
-
Yakima RuggedLine® is a premium platform-to-vehicle mounting system, designed and tested in Australia. Constructed from powdercoated stainless steel for ultimate reliability, RuggedLine is ready to be paired with the existing (and proven) range of LockNLoad Platforms. The strength of RuggedLine also boasts a modern look designed by an automotive styling firm. The angular cut outs along the length pair well with modern vehicle styling trends, and topping this off is premium spec automotive badging in blackened chrome.
-
-
The Wedgetail Adjustable Awning Bracket allows you to mount an awning to the side of your Wedgetail rack and adjust the height to suit.
-
-
The Jerrycan holder is designed for the safe storage of poly Jerrycans and comes supplied with a tie-down strap to hold the Jerrycan in place. The holder fits using the existing channels in your Wedgetail rack. These can be mounted as single items or grouped and are removable if they are not required. Standard colour is black.
-
The Hi-Lift jack bracket allows you to safely carry a Hi-Lift jack on the side of your roof rack and has inbuilt height adjustment. The holder is zinc plated before it is powder-coated to ensure a long-lasting corrosion-free finish. Standard colour is black.
-
The light bar support plate fits onto the front frame member and extends to under the first cross bar where it attaches into the existing bottom channel in the cross bar. It provides a strong mounting platform for a wide range of LED light bars.
-
The rubber inserts fit into the top channel of the cross bars on all Wedgetail roof racks. The rubber inserts sit above the top of the cross bar and provide a soft surface to protect items that are stored on the roof rack and also prevent items moving around. The inserts are available in a range of sizes to fit all of the Wedgetail roof racks. They are fitted by pushing the inserts into the support channels.
-
The rubber inserts fit into the top channel of the cross bars on all Wedgetail roof racks. The rubber inserts sit above the top of the cross bar and provide a soft surface to protect items that are stored on the roof rack and also prevent items moving around. The inserts are available in a range of sizes to fit all of the Wedgetail roof racks. They are fitted by pushing the inserts into the support channels.
-
The rubber inserts fit into the top channel of the cross bars on all Wedgetail roof racks. The rubber inserts sit above the top of the cross bar and provide a soft surface to protect items that are stored on the roof rack and also prevent items moving around. The inserts are available in a range of sizes to fit all of the Wedgetail roof racks. They are fitted by pushing the inserts into the support channels.
-
The rubber inserts fit into the top channel of the cross bars on all Wedgetail roof racks. The rubber inserts sit above the top of the cross bar and provide a soft surface to protect items that are stored on the roof rack and also prevent items moving around. The inserts are available in a range of sizes to fit all of the Wedgetail roof racks. They are fitted by pushing the inserts into the support channels.
-
The rubber inserts fit into the top channel of the cross bars on all Wedgetail roof racks. The rubber inserts sit above the top of the cross bar and provide a soft surface to protect items that are stored on the roof rack and also prevent items moving around. The inserts are available in a range of sizes to fit all of the Wedgetail roof racks. They are fitted by pushing the inserts into the support channels.
-
The rubber inserts fit into the top channel of the cross bars on all Wedgetail roof racks. The rubber inserts sit above the top of the cross bar and provide a soft surface to protect items that are stored on the roof rack and also prevent items moving around. The inserts are available in a range of sizes to fit all of the Wedgetail roof racks. They are fitted by pushing the inserts into the support channels.
-
The rubber inserts fit into the top channel of the cross bars on all Wedgetail roof racks. The rubber inserts sit above the top of the cross bar and provide a soft surface to protect items that are stored on the roof rack and also prevent items moving around. The inserts are available in a range of sizes to fit all of the Wedgetail roof racks. They are fitted by pushing the inserts into the support channels.
-
The Wedgetail shovel holder locks into the existing channels in your Wedgetail rack, allowing you to carry a long-handled shovel safely. Standard colour is black.
-
The Wedgetail spare wheel holder is a simple but effective way of securing a spare wheel to your roof rack.
-
Need a safe way to carry your Maxtrax or Treds recovery tracks?
-
Need a safe way to carry your Maxtrax or Treds recovery tracks?
-
The tie-down eyelets lock into the existing channels in your Wedgetail rack providing additional tie-down points for ropes or hooks. The eyelets are available in kits with four eyelets. The eyelets are manufactured in stainless steel.
-
The Wedgetail platform roof rack is the first roof rack of its style to allow for fitment around vents and air conditioners often found on RV's and campervans. The Vent Hole Kit alloys you to trim crossbars out of your Wedgetail platform roof rack to clear the obstacles on your roof. You may need to clear a vent, air conditioner or even a sunroof. This kit allows you to remove a section out of up to three crossbars.
-
The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.
-
The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.
-
The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.
-
The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.
-
The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.
-
The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.
-
The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.
-
The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.
-
The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.
-
The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.
-
The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.
-
The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.
-
The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.
-
The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.
-
The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.
Filter
The Rhino-Rack Backbone is a mounting system for the Ford F250/350/450/50 Super Crew Cab (2017 onwards).$692.00
Yakima RuggedLine® is a premium platform-to-vehicle mounting system, designed and tested in Australia. Constructed from powdercoated stainless steel for ultimate reliability, RuggedLine is ready to be paired with the existing (and proven) range of LockNLoad Platforms. The strength of RuggedLine also boasts a modern look designed by an automotive styling firm. The angular cut outs along the length pair well with modern vehicle styling trends, and topping this off is premium spec automotive badging in blackened chrome.
$9,999.00
The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.
The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.$9,999.00
The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.
The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.
The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.
The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.
The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.$9,999.00
The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.$9,999.00
The mounting rails are custom designed for each vehicle so that the weight of the platform and load is evenly spread over the vehicle roof. The mounting rails are laser cut from 3 mm steel and then zinc electro-plated and powder coated with a matt black finish.$9,999.00
